Holden Headers HQ to WB
Sale$995.95
$1,019.66
or make 4 interest-free payments of $248.98 AUD fortnightly with
More info.
Key Features
• Pacemaker performance headers for Holden HQ, HJ, HX, HZ and WB models
• Manufactured from mild steel
• Designed to suit a wide range of V8 and engine conversion applications
• Available in Tri-Y and 4 into 1 header designs
• Multiple primary tube sizes available to suit performance requirements
• Vehicle and engine-specific fitment
• 2-year Pacemaker manufacturer warranty
• Professional installation recommended
Engine Compatibility
• 253–308 Holden V8
• Holden 304 V8 with EFI cylinder heads
• GM LS-series engine conversions
• Small Block Chevrolet (SBC)
• Big Block Chevrolet (BBC)
IMPORTANT INFORMATION BELOW - MUST READ!
308 Tri-Y - Linkages on Column Auto must be modified to fit. Will fit manual Column linkages without any modification. Will Fit Hi-Torque Starter Motor. Will fit Ford Toploader Gearbox with Hatfield Bellhousing. Has fit TH400.
308 4-1 1 5/8" - Will NOT fit factory Air-Con. Column Auto linkages must be modified. Will fit Ford Toploader & TH400.
308 4-1 1 3/4" - Will NOT fit HQ type mechanical clutch, Column change Auto or Manual, Powerglide. These Headers WILL fit TH400, HZ type Cable Clutch, Ford Toploader Gearbox with Hatfield Bell Housing.
304 (VN Heads) Tri-Y 1 5/8" & 1 3/4" - Will NOT fit RHS Column Shift, LH-LX steering knuckle. These Headers WILL fit High energy sump, HQ type mechanical clutch, Aussie 4 speed with cable clutch, VN-VS 5 speed T5, Supra 5 speed with Hatfiled Bellhousing, TH400/TH350. Will fit TH700 with Hatfield rear cross member using TH700 g/box mounts along with 308 engine mounts.
LS 4-1 1 3/4" & 1 7/8" - Will fit powersteering & Air-con.
SBC Tri-Y 1 5/8" & 1 3/4" - Will NOT fit slant plug heads, raised port heads. Highly advised to use original engine mounting spacers or Pacemaker spacer PEMP350. Will fit TH400 & Powerglide gearboxes.
SBC 4-1 1 5/8" & 1 3/4" - Will NOT fit raised port heads or column shifts. Will only fit with standard/original engine mounting spacers or Pacemaker part PEMP350. Will fit slant plug heads & TH400. Will fit Power Steering. Will NOT fit with Air-Con.
396-454 Big Block Tri-Y 2" - Will only fit using HQ 350 Chev original engine mounting spacers OR Pacemaker spacers part no. PEMP350.
-
Where abouts are you located?
Our Warehouse & Fabrication Workshop is in Perth, Western Australia.
-
I can't find your phone number?
The most efficient way for us to assist you or answer queries and questions is via email or social media messaging. We trialed a phone number for a short time but were forced to close the service down due to high volume telemarketing calls from overseas and other such abuse.
-
How long is the packaging/handling time on orders?
We always strive for same day despatch, however in some extreme cases it may take a couple of business days. We do not operate on weekends and neither do most of the courier services.
-
Where is my order?
Upon making a purchase online you are automatically sent confirmation and later shipping info once the picking and packaging is complete. The Tracking number can be found in the email you receive.
-
Where is my tracking or order email?
Quite often the email client you are running can accidentally send our emails to your Spam/Junk Folders. It is always worth checking this before getting too worried.
-
I purchased multiple items and have only received part of the order.
More often than not, when a multiple item order is packaged and prepared it has to be sent separately. A lot of our products are pre-packaged and will not all fit in one box.
-
I have browsed your store and I can't find an exhaust system for my vehicle
This usually means we don't currently make a system for your vehicle yet.
-
Do you make an exhaust system for my car?
If you have browsed our shop and you cannot find your make or model then we currently do not make a system for that vehicle.
-
Do you do custom exhaust systems?
Yes! We love fabricating custom exhausts. Once you know what size and how loud or quiet you would like it simply hit us up.
-
Do you need my vehicle to make me a custom exhaust?
Yes! There is no way of knowing how something custom made will fit a vehicle without that vehicle.
-
How much for a custom exhaust system?
How long is a piece of string? :) Its a common yet frustrating question. What material? Mild Steel, Stainless Steel? What grade Stainless Steel? 304, 409, 316? Twin or Single System? What size tube? How many mufflers? Cat-back or Full System? Full System including custom Headers? This is DEFINITELY a case where more information is best!
DRIVE
WITH CONFIDENCE
Our industry leading warranties provide peace of mind.
QUALITY
CAR PARTS
Made from premium components using the lastest technology.
FREE NATIONAL
SHIPPING
Same day/next day dispatch Australiawide.
AUSSIE AUSSIE
AUSSIE
We are proud to be Australian owned and operated.
DRIVE
WITH CONFIDENCE
Our industry leading warranties provide peace of mind.
QUALITY
CAR PARTS
Made from premium components using the lastest technology.
FREE NATIONAL
SHIPPING
Same day/next day dispatch Australiawide.
AUSSIE AUSSIE
AUSSIE
We are proud to be Australian owned and operated.
